Raw Material Room Temperature Vulcanizing RTV -2 Liquid Silicone Rubber for Sculpture Plaster Gypsum
Description of Tin Cure Silicone Rubber
HN-625 A/B is a two-component liquid silicone material. Two components are mixed in a ratio of 100:2. This product is cured at room temperature.
Application of Tin Cure Silicone Rubber
HN-625 A/B Industrial-grade liquid silicone rubber for manufacturing construction molds is suitable for the molding and reproduction of large-scale stones, gypsum, cement parts, cultural stones, artificial stones, Roman columns, stone carvings and other furniture, construction and decoration products; it can also be used for
resin handicrafts, gypsum handicrafts, soap handmade soaps, tire turning molds, and other segmented molds.
Technical parameter of Tin Cure Silicone Rubber
| Model | HN-625AB |
| Feature | easy foaming |
| Viscosity (cs) | 170000 |
| Gravity ( G/cm 3 ) | 1.06 |
| Hardness(A°) | 20 |
| Strength( MPa) | 3.1-3.6 |
| Tear Strength (kN/m ) | 19.8-24.3 |
| Elongation(%) | 600-720 |
| Linear Shrinkage(%) | ≤0.2 |
| Curing Agent Addition Ratio(%) | 2-3% |
| Operating Time( mins ) | 30-40 |
| Curing Time( hours ) | 3-4 |
Feature of Tin Cure Silicone Rubber
1. Strong tear resistance, high and low temperature resistance, acid and alkali resistance, and aging resistance;
2. Good fluidity, easy to release foam, easy to demould, and the finished product will not turn white;
3. The silicone mold can be turned over frequently and has a long service life;
4. The linear shrinkage rate is less than two thousandths;
5. Product color, hardness, viscosity, and operating time can be adjusted as needed.
Attention
1. There are 30 minutes of operation time (at room temperature) when adding 2% curing agent, and the mold can be completely cured in 4 hours. Generally, the mold is better placed for 24 hours before use. At this time, the performance of the mold is relatively stable in all aspects, and the use effect will be better.
2. The mixing ratio of silicone and curing agent is 100:2-3. For example, 100 grams of silicone, add 2-3 grams of curing agent. In principle, do not take the method of adding less or more curing agents.
Product Tags:
|
|
Vulcanizing RTV-2 Tin Cure Silicone Rubber Raw Material For Plaster Gypsum Molding Images
|
